Saturday, August 6, 2011

PS3 Freezing Problems - Fix a PlayStation 3 Freeze Error



Sony PlayStation 3, received overwhelming response from customers in 2006. It was launched in Japan and it is seen as retaliation for the Microsoft Xbox 360 and Nintendo Wii.

the far edge of the PS3 gamers is its unique feature is that online gaming is the PlayStation Network. One feels as if part of the game creators. Top of multimedia features on the PS3 and it is also associated with the PlayStation Portable. Although it has all the high features, the PS3 is not protected from the occasional freeze, and he knows that. It is the most irritating time enjoying the best game time when everything suddenly comes to a halt.

General causes PlayStation3 freezes

It is rare that the PS3 will freeze, but it happens sometimes, and are caused by a scratched disk or the console overheating.

1 Overheating: When the console is kept in a room filled with not enough breathing space, then it will be overheated and too much heat on the PS3 will cause decay. This can be easily repaired when the console is best and no other electronic device is nearby.

2 Scratches: scratches on the disc, which can cause loops in and it usually happens at the speed milisekundu.Konzola not actually frozen in this case. His time interval that continuously gets repeated at some time.

PS3 freezing is generally not too serious. In the worst case of freezing, the console must be taken to the Sony store where the donio.Činjenica is that the owner just do some basic trouble shooting for fixing the problem.

Fixing PS3 freezing

If the PS3 freezes, it must be kept away from other electronic machines at home. Its power must be pushed until beep is čuo.Loose cables should be checked and they can be pulled and plugged back in the hard disk must be aired out for a while and put back into the console, after some time.

If that fails, then repair guide can be consulted to try fixing the PlayStation 3 It is fully detailed and illustrated.

PlayStation 3 Repair Guide summary

In short, this is how it works:

- console to be taken apart carefully
- CPU and GPU to the console must be provjereni.Bijela can be seen to be cracked and unevenly spread, it will need cleaning.
- Console GPU and CPU should be cleaned with dry paper, sand paper, if used, then a very rough should not be used.
- Flat surfaces must be cleaned and if still necessary, Arctic Silver 5 compound can be purchased and used. It must be applied evenly and thinly on both surfaces.
- Surface that distributes small ensures that every gap is covered.
-. Cooling cap can finally return to the

No comments:

Post a Comment