Xbox 360 Problems - Red Lights

>...

The good news is that it does not necessarily mean the end of your beloved console. This does not mean that you send it for repair and wait for weeks to return it. There are ways that we can return to the red lights back to green with a little time and basic household tools, but before you go tearing things apart, there are several things that should be done first.

The good news is that it does not necessarily mean the end of your beloved console. This does not mean that you send it for repair and wait for weeks to return it. There are ways that we can return to the red lights back to green with a little time and basic household tools, but before you go tearing things apart, there are several things that should be done first.

...

shows the number of red light indicates the type of problems that have May. If your device shows four red lights have the easiest to fix them all. Four red lights indicates that the AV connector disconnected from the unit and fix it, well that's pretty obvious! A red light indicates the hard drive failure and will require little more than look at the three red light indicates a hardware failure, which will also need a little more attention. Although these last two sound bad they can be overcome.

...

The first thing to do is to switch off and let it sit for awhile to expel the heat was constructed that could be causing the problem. Be sure to check the ventilation grill machines have adequate ventilation and that the machine has a good supply of fresh air around him. For example, instead of leaving it in a drawer or cabinet pull it out and put it on the wrong box. After the floor also aids in dissipating any unwanted heat. When you are satisfied that the machine has cooled, to the fire and see what you have.

...

If the problem persists, and you do not want to wait for Microsoft to get their happy time fixing and charge you a pretty penny or a machine is out of warranty there is no need for stres.Vrlo common cause of this type of failure is that the solder connections inside the machine become brittle and crack due to extreme heat inside the device. Type of solder is used also the theme of the claim, because it is believed that the lead and prone to problems, one is exposed to heat over time, again this problem can be overcome.

...